Our Pepperl+Fuchs Bebco EPS Type Z purge system reduces the classification within the protected enclosure from Division 2 to non-hazardous. General-purpose equipment can be operated within the protected enclosure.

Note: Vents are required for most Type Z purge enclosures

Type Z purge systems:

• Allows general purpose equipment to be operated in a Division 2 location
• Controls purging, pressurization & monitoring pressures
• Enclosure sizes to 450 cu. ft. 
• Conforms to NFPA 496 and ISA 12.4 standards 
• UL, cUL, FM, ATEX certified 
• Constructed with corrosion resistant stainless steel hardware

3000 Series Type Z Purge System

Our 3000 series, Type Z purging system will purge and pressurize the protected enclosure and maintain pressure within the enclosure. Suitable for Class I, Division 2 to non-hazardous and Zone 2 to non-hazardous.

1000 Series Type Z Purge System

The 1000 series type Z purge system is suitable for Class I, Division 2 to non-hazardous area applications and Class II, Division 2 to non-hazardous area applications.

Accessories for Type Z Purge System

Many of the Type Z purge system models require a vent. Learn more about accessories and vents for the Type Z purge system.